-
2025-03-10 22:13:35
1. Appearance inspection: Regularly check the surface of the slag tank for wear, deformation, cracks and other obvious defects. Check the tank mouth, tank wall, tank bottom and other parts of the tank, if found that the depth of wear exceeds the prescribed range, or the appearance of length and widt...
-
2025-03-10 17:10:05
The rolling wall is mounted on the frame of the crusher, which is curved and moves relative to the crushing wall driven by the eccentric shaft. When working, the material is squeezed, impacted and ground between the crushing wall and the molar wall, and thus is gradually crushed. For example, in the...
-
2025-03-10 17:05:18
1. Equipment inspection: before lifting the slag tank, be sure to check the lifting equipment, such as crane lifting mechanism, braking device, wire rope and so on. Lifting mechanism should run smoothly, no jamming phenomenon; brake device is sensitive and reliable, can be quickly braked in an emerg...
-
2025-03-10 17:01:43
In metal ore mining, such as copper ore, iron ore, etc., hammerheads are used to crush raw ores. Through the impact of the hammer head, the lumpy ore is crushed into smaller particles for subsequent beneficiation, refining and other process operations. Due to the high hardness of the ore, hammer hea...
-
2025-03-10 17:00:15
Hammer head is the core component of the hammer crusher, when the equipment is running, the high-speed rotor drives the hammer head to strike the material entering the crushing chamber. Under the impact of the hammer head, the material is broken into small pieces and thrown to the crushing plate for...
-
2025-03-03 22:12:13
1. Avoid overloading: strictly in accordance with the rated capacity of the slag tank loading slag, overloading will make the slag tank to withstand excessive pressure, accelerated wear and tear or even lead to tank deformation, rupture.2. Smooth lifting: in the process of lifting the slag tank, to...
Pусский
Whatsapp
Phone